On our page you will find a multitude of information that may be of your interest. If you have any questions, do not hesitate to contact our team:
Welcome! Through this tool you will configure your centrifuge according to your needs. We will ask you some simple questions that will allow us to offer you the best result fitted to your working parameters. If at any time you wish to modify one of the selected parameters, you can return to it by selecting it in the menu on your left... let's start! or would you prefer to watch our tutorial-video first?
Select the type of centrifuge according to the temperature required by the working protocols followed. We have option for refrigerated, heated and ventilated centrifuges+info
Where will the centrifuge be installed, on a work bench or should it have its own support?+info
Now let's choose the type of tube you will be working with. Based on its dimensions and volume, and whether it should be conical or with a round bottom... Attention: Prioritise the tubes dimensions rather than the volume.+info
What speed do you need for the selected tubes? First choose if you want to make this search in RPM or RCF (xg) values, to obtain the maximum working speed ranges.+info
It shows the maximum number of tubes that can be spun at the same time in each working cycle, based on the previous selection we have made of the tube type and the speed of the rotor.+info
Almost finished! The only thing left to do is to choose if we want to work with a swing-out or an angle fixed rotor. When this parameter is not decisive, the option "indifferent" can be selected.+info